Optical Isolator Interface Module
- This versatile interface between an encoder and any receiving electronics provide an electrically robust output to the receiving electronics. This presents a solid solution for systems with poor signal compatibility, noise and/or grounding problems.
- Encoder의 펄스전압을 여타 전압으로 변환, 8개까지 분기가 가능함. 분기된 출력신호간의 상호 절연 보호됨.
Intrinsic Safety Barrier
- This galvanically isolated intrinsically safe barrier is the perfect complement to BEI encoders for hazardous environments. It is electrically compatible with all popular counters, PLCs and controllers, and it features isolation for power and three signal channels, as well as LED indicators for power and data.
Dual Encoder to USB Converter Module
- This module can handle signals from two SSI absolute encoders or two quadrature encoders and translates the encoder position to industry standard USB 2.0 format.
- Incremental Encoder와 SSI 출력의 Absolute Encoder의 펄스출력을 USB2.0 포멧으로 변환, Encoder 2개까지 연결가능.
Anti-Dither Module
- Uses internal discrimination circuitry to avoid errors due to start/stop cycles or vibration environments.
- 기계적인 진동이나 전기/전자적인 장애로 인하여 발생되는 불안정한 펄스를 개선함.
Divide-By Module
- Accepts single ended or differential inputs and divides the signal by a factory set number from 2 to 256. The resulting output signal is a reduced resolution of the input signal.
Serial to Parallel Converter Module
- Converts serial data from an SSI or RS-422 source to 15-bit parallel output.
- BEI Encoder의 SSI 또는 RS422 직렬신호를 병렬신호로 복원함으로 배선비용 절감 및 장거리 전송의 문제점 해결과 잡음면역 제공.
Encoder Signal Broadcaster Module
- Accepts standard incremental inputs and can broadcast up to four signals to four independent devices.
- 단일 Encoder 출력을 4개소까지 분기하여 공급하며, 분기된 출력은 광학적으로 절연됨. 잡음의 면력성과 ground loop의 개선에 기여함.
SA100R Rotary Digital Display (DRO)
- This versatile 7-digit display reads out in degrees/minutes/seconds (DMS) or decimal degrees.
- 전면버튼 설정기능-Automatic calibration, Display resolution, Axis resolution, Count direction, Referencing, Loss of signal error, Angular error, Gear ratio compensation, Table radius factors.
SA100 Linear Digital Display (DRO)
- This versatile 7-digit display reads out in inches or millimeters.
- 전면버튼 설정기능- Display resolution, Axis resolution, Count direction, Referencing, Signal error detection, Error compensation, Scale factors.